Aion (2xDVD5) or (3xDVD5)

Conversion by ‘pakrat2k2’

1) Create a Temp folder on your hardrive.
Name this folder: Aion_D1. This will be the name (Label) of our First DVD.

2) Copy all the contents of the Aion DVD9 to the Aion_D1 folder.

3) Download the needed Aion.ISCab files from HERE and extract the contents of the RAR file to the Aion_D1 folder overwriting any files if prompted.

4) Double Click the ‘editlayout.bat’ file in the Aion_D1 folder and wait for the process to finish.
(changes the layout of the DVD from a Single Dual Layered 9GB to DVD5 4GB ) It only takes a minute or two.

5) Double Click the ‘repackcabs.bat’ file in the Aion_D1 folder and wait for the process to finish. (this can take time AND Hard Drive space, make sure you have plenty of Freespace ~20GB ) be patient and wait till it ends.

This repacks the ‘data2.cab’ file from 9GB down to 4GB. It also creates another ‘data3.cab’ file that will make up the rest of the split ‘data2.cab’ file.
Note: Some versions MAY end up with data4.cab file as well.

6) Double Click the ‘cleanup.bat’ file in the Aion_D1 folder and wait for the process to finish.
(this removes the now unwanted files you downloaded in the rar file which were only used to edit the layout and the repack processes)

7) Create another Temp folder on your hardrive and name it: Aion_D2
NOTE: Those with the version of the game which also creates a ‘data4.cab’ file will also need another Temp folder named: Aion_D3

8) From the Aion_D1 folder COPY the ‘Embedded’ folder and the ‘launcherextension’ folder to the ‘Aion_D2’ folder.

9) From the Aion_D1 folder MOVE the ‘data3.cab’ file to the ‘Aion_D2’ folder.

*Only do Steps 10 and 11 if the repack process also created a ‘data4.cab’ file.

10) From the Aion_D1 folder COPY the ‘Embedded’ folder and the ‘launcherextension’ folder to the ‘Aion_D3’ folder.

11) From the Aion_D1 folder MOVE the ‘data4.cab’ file to the ‘Aion_D3’ folder.

Each DVD’s file layout should now be:

Aion_D1 folder (DVD1) – all files / folders ‘except’ data3 / data4 cab files.

Aion_D2 folder (DVD2) – Embedded folder + launcherextension folder + data3.cab file.

Aion_D3 folder (DVD3) – *if needed* – Embedded folder + launcherextension folder + data4.cab file.

12) Create ISO’s of the contents from the 2 or 3 Temp folders to TEST the Install.

13) If the test is ok burn the contents of the Aion_D1 folder to a DVD with the Label: Aion_D1

14) Burn the contents of the Aion_D2 folder to a DVD with the Label: Aion_D2

15) Burn the contents of the Aion_D3 folder to a DVD with the Label: Aion_D3

NOTE: You can use any Labels you choose.

Alice in Wonderland (2xDVD5)

Install Sequence: DVD1-DVD2.

Conversion by ‘canyon33′

1) Create 2 Temp folders on your hardrive.

Name one folder: ALICEDVD1. This will be the name (Label) of DVD1.

Name the other folder: ALICE DVD2. This will be the name (Label) of DVD2.

2) Copy all the contents of the ‘Alicein Wonderland’ DVD9 to the ‘ALICE DVD1’ folder.

3) Download the needed ISCab files from HERE and extract the contents of the RAR file to the ‘ALICE DVD1’ folder overwriting any files if prompted.

4) In the ‘ALICE DVD1’ folder RUN the repack_cabs.bat file and WAIT until the process finishes.

5) When finished, DELETE the following 6 files from the ‘ALICE DVD1’ folder:

ISCAB.exe
ISTools.dll
list.ini
make_list.bat
MediaBuild40.dll
repack_cabs.bat

6) From the ‘ALICE DVD1’ folder, MOVE the ‘data3.cab’ file to the ‘ALICE DVD2’ folder.

7) From the ‘ALICE DVD1’ folder, COPY ALL the folders and files (EXCEPT the data1.cab & data2.cab files) to the ‘ALICE DVD2’ folder.

8) Using the Notepad open the Autorun.inf file and edit as shown below then Save it:

[autorun]

OPEN=0
ICON=Icons\Alice.ico

9) Burn the contents of the ‘ALICE DVD1’ folder to a DVD (or Create ISO’s) with the Label: ALICE DVD1

10) Burn the contents of the ‘ALICE DVD2’ folder to a DVD with the Label: ALICE DVD2

Alpha Protocol (3xDVD5)

Conversion by ‘senseman’

Install Sequence: DVD1-DVD2-DVD3

1) Create 3 Temp folders on your hardrive.
Name one folder: AP1. This will be the name (Label) of DVD1.
Name another folder: AP2. This will be the name (Label) of DVD2.
Name the other folder: AP3. This will be the name (Label) of DVD3.

2) Copy all the contents of both Alpha.Protocol DVD9’s to the AP1 folder.

3) Download the needed ISCab files from HERE and extract the contents of the RAR file to the AP1 folder overwriting any files if prompted.

4) In the AP1 folder RUN the repack_cabs.bat file and wait until the process finishes.

5) Delete the following 6 files from the AP1 folder:

ISCAB.exe
ISTools.dll
list.ini
make_list.bat
MediaBuild40.dll
repack_cabs.bat

6) From the AP1 folder MOVE the data3.cab file to the AP2 folder.

7) From the AP1 folder MOVE the data4.cab and data5.cab files to the AP3 folder.

8) From the AP1 folder COPY the Support folder and the Root folder to both the AP2 and the AP3 folders.

9) From the AP1 folder COPY the autorun.inf and the APLauncher.exe files to both the AP2 and the AP3 folders.

10) Using the Notepad open the Autorun.inf file in both the AP2 and AP3 folders and edit as shown below then Save it:

[autorun]
open=0
icon=APLauncher.exe
label=Alpha Protocol

11) Burn the contents of the AP1 folder to a DVD (or Create ISO’s) with the Label: AP1
12) Burn the contents of the AP2 folder to a DVD with the Label: AP2
13) Burn the contents of the AP3 folder to a DVD with the Label: AP3

DVD Sizes:
DVD 1 = 3,16 GB
DVD 2 = 3,14 GB
DVD 3 = 3,95 GB

ArmA 2 Reinforcements (2xDVD5)

Conversion by ‘peterf1999’

1) Create a Temp folder on your hardrive.
Name this folder: ArmA2RFT.

2) Download the ‘A2RFT_2xDVD5.rar’ file from HERE and extract the contents of the RAR file to the ‘ArmA2RFT’ folder.

3) Copy all the contents of the ‘ArmA2 Reinforcements DVD9’ to the ‘ArmA2RFT\A2RFT_1’ folder. Do NOT overwrite any files!

4) DELETE the ‘setup.crc’ file from the ‘ArmA2RFT_2xDVD5\A2RFT_1’ folder.

5) INSTALL the game from the ‘ArmA2 Reinforcements DVD9’.

6) COPY the following folders from the ‘Game Installation’ folder to the ‘ArmA2RFT\A2RFT_2\OperationArrowhead\Expansion’ folder:

Addons
Dta

7) DELETE the ‘product.bin’ file from the ‘ArmA2RFT\A2RFT_2\OperationArrowhead\Expansion\Dta’ folder.

8) Burn the contents of the ‘A2RFT_1’ folder to a DVD (or Create an ISO) with the Label: A2RFT_1

9) Burn the contents of the ‘A2RFT_2’ folder to a DVD (or Create an ISO) with the Label: A2RFT_2

ArmA 2: Operation Arrowhead (2xDVD5)

Conversion by ‘yener90’

*Supports Multi2 and Multi5 versions*

1) Create a Temp folder on your hardrive. Name this folder: DVD1.

2) Copy all the contents of the ArmA 2: Operation Arrowhead DVD9 to the DVD1 folder.

3) Download the ARMA2OA_DVD9_2xDVD5.7z file from HERE and extract the contents of the RAR file to the DVD1 folder overwriting any files if prompted.
(Custom Converter created by yener90.)

NOTE:If you have the Multi5 version you will also need to download the MULTI4_SETUP.7z
file from HERE and also extract the contents of this rar file to the DVD1 folder and again overwrite any files if prompted.

4) From the DVD1 folder RUN the ‘ moveit.exe’ file and wait for the process to finish before proceeding. (moveit.exe will automatically create the 2nd needed folder).

5) After the process has finished DELETE the ‘moveit.ex’e file from the DVD1 folder.

6) Burn the contents of both Temp folders to a DVD (or Create ISO’s) using the label: ARMA2OA

NOTE: Both DVD1 and DVD2 use the same label: ARMA2OA

DVD1: 4,23 GB
DVD2: 3,45 GB